AZSR126 26 am p mini a ture power rel a y fe a tures arrangement spst (1 form a) ratings resistive load: max. switched power: 8587va max. switched current: 31a max. switched voltage: 277 vac rated load ul vde 26a at 277 vac, resistive, 75c, 50k cycles 26a at 250 vac, resistive, 75c, 50k cycles 22a at 277 vac, resistive, 85c, 100k cycles 22a at 250 vac, resistive, 85c, 100k cycles 31a at 277 vac, cos phi 0.8, 85c, 50k cycles * 31a at 250 vac, cos phi 0.8, 85c, 50k cycles * 26a at 277 vac, resistive, 85c, 50k cycles 26a at 250 vac, resistive, 85c, 50k cycles 22a at 277 vac, resistive, 85c, 100k cycles 22a at 250 vac, resistive, 85c, 100k cycles * duty factor: 0.1 seconds on / 10 seconds off material resistance silver tin oxide < 100 milliohms initially (at 6v, 1a, voltage drop method) contacts life expectancy mechanical electrical minimum operations 2 x 10 5 5 x 10 4 at 26a 250 vac res. operate time release time 20ms max. at nominal coil voltage 10ms max. at nominal coil voltage (with no coil suppression) dielectric strength (at sea level for 1 min.) 4500vrms coil to contact 2500vrms between open contacts insulation resistance 1000 megaohms min. at 20c, 50 0 vdc 50% rh holding voltage greater than 35% of nominal coil voltage dropout greater than 10% of nominal coil voltage ambient temperature operating storage at nominal coil voltage -40c (-40f) to 60c (140f) at max. 80% of nominal coil voltage -40c (-40f) to 85c (185f) -40c (-40f) to 105c (221f) vibration shock enclosure terminals max. solder temp. 1.5mm da at 10-55 hz 20 g p.b.t. polyester tinned copper alloy, p.c. 260c (500f) max. solder time 5 seconds max. solvent temp. 80c (176f) max. immersion time 30 seconds weight 25 grams general data power at pickup voltage (typical) max. continuous dissipation temperature rise 690mw 2.0w at 20c (68f) ambient 90c (194f) at nominal coil voltage temperature max. 155c (311f) coil 1. all values at 20c (68f) 2. relay may pull in with less than ?must operate? value. 3. specifications subject to change without notice. notes ? dielectric strength 4500vrms ? 31 amp switching ? contact gap > 1.8mm ? clearance / creepage > 6 . 4 / 7.5mm ? ul, cur e44211 ? vde pending 8/17/15
AZSR126 mechanical data 30.4 2 x ? 1.1 + 0.1 15.9 4 x 3.5 0.5 22.0 0.1 27.6 0.1 3.8 0.1 1.45 0.1 12.0 0.1 1.75 0.1 23.3 2 x 0.8 2 x 0.7 2 x 1.5 2 x 0.7 2 1 3 4 pc board layout wiring diagram viewed toward terminals viewed toward terminals 2 x ? 1.8 + 0.1 tolerance: 0.3 mm relay ordering data coil specifications nominal coil vdc must operate vdc min. holding vdc max. continuous vdc coil resistance ohm 10% order number 9 6.3 3.2 10.8 58 AZSR126-1ae-9d 12 8.4 4.2 14.4 103 AZSR126-1ae-12d 18 12.6 6.3 21.6 230 AZSR126-1ae-18d 24 16.8 8.4 28.8 410 AZSR126-1ae-24d 8/17/15
|
